The TORCS Racing Board
Username: Password: Remember Me?
Lost Password Register
Author: dummy | Created: 2019-05-29 22:26:02
Subject: Mouse: Makefile
I found another problem with the Makefile under cars/car1-trb1/:
replaced *.xml with *.* so the .spr file will be installed

I submitted the result already without the .spr file, but after running the race again with .spr, the end result was the same. Be it a way more interesting race though ;)

@Eliam: if you didn't submit the result already, please consider making the change from above beforehand, as you're on Linux I believe.

Last Edited: 2019-05-29 22:29:13 by dummy
    Author: timfoden | Created: 2019-05-30 08:37:38
    Subject: Re: Mouse: Makefile
    > I submitted the result already without the .spr file, but

    No probs... it was my mistake. I'll also sort this out for the next release.

    > Be it a way more interesting race though ;)

    Yes, it does make a small but not quite insignificant difference to mouse's lap time. Need to sort out the pitting/tyre strategy (and improve overtaking too), it seems. :) (Up 'til now I've been mostly focusing on increasing Mouse's speed to get it back into contention, but have been neglecting the other aspects a bit.)

    Last Edited: 2019-05-30 08:44:44 by timfoden