The TORCS Racing Board
Username: Password: Remember Me?
Lost Password Register
Author: firechief | Created: 2019-07-30 06:23:01
Subject: USR default.xml sets Front Wing Angle
My apologies everyone, I never thought to check this file. It sets the front wing angle to 12, which is of course against the rules.

I've removed the offending lines from my local copy, and it seems to qualify the same, but I don't know if that'll be the same for everyone else nor do I know if its behaviour in the race itself will be badly affected.

I ask if everyone could remove these lines from default.xml under car1-trb1, and if the robot can't stay on the track and causes mayhem then please exclude it from this race. Hopefully, fingers crossed, it'll be ok though.
Last Edited: 2019-07-30 06:23:36 by firechief
    Author: dummy | Created: 2019-07-30 08:49:09
    Subject: Re: USR default.xml sets Front Wing Angle
    I removed the front wing from default.xml and didn't see any change in the driving. So seems to be no problem at all ;)
    Last Edited: 2019-07-30 08:49:09 by dummy
    Author: timfoden | Created: 2019-07-30 09:01:16
    Subject: Re: USR default.xml sets Front Wing Angle
    Also your usr_2019.xml file appears to call up car3-trb1 instead of car1-trb1 for both cars.
    Last Edited: 2019-07-30 09:01:16 by timfoden
      Author: firechief | Created: 2019-07-30 09:34:52
      Subject: Re: USR default.xml sets Front Wing Angle
      Thanks! Not sure how that slipped through (ok I am sure - copy/paste) but at least its an easy fix.
      Last Edited: 2019-07-30 09:34:52 by firechief